Product Information

Decsalants AST 1121

Decsalants AST 1121

Aqua Sai Technologies is manufacturing a superior range of Decsalants AST - 1121 to respectable clients. The offered range of Decsalants AST - 1121 is made using superior grade raw material.
Specifications
Brand: Aqua Sai Technologies
Detailed Description

AST – 1121 : Descalant

Application: Descaling for heat exchangers, cooling towers and various scale deposited lines.

In every industry, water is used in one form or other. Water is mainly used as a cooling medium in industries for equipments like heat exchangers, compressors, radiators, chillers, spot welding guns, diesel generator sets, furnaces, condensers, etc. As we all know untreated water can cause harm to the equipments as impurities like dissolved, suspended solids shall form thin deposits in the pipelines, tubes, water passages etc., which is called scales.

Application: specially designed formula only for chiller line descaling

Purpose of Chemical Cleaning:

The primary reasons for chemical cleaning of boilers / heat exchangers are to prevent tube failures & improve unit availability. Tube failures in low pressure boilers/heat exchangers are normally the results of creep which occurs when internal deposits produce excessive metal temperature. A relatively smaller quantity of deposit creates difficulties in high pressure boilers. Caustic corrosion & hydrogen damage, which occur only in the presence of deposits, may cause tube failures at temperatures well below the creep limit. Deposits originating both from fabrication & during operation should be considered potential problems.

All the pressure parts of steam generator may be subjected to heat treatment of some sort during fabrication or erection – during forming operations, stress relief, welding or bending. Whenever carbon low alloy steels are subjected to high temperatures in the presence of air, oxidation occurs, the oxide produced is known as mill scale. Mill scale on boiler/ heat exchanger tubing is normally very thin with the exception of areas near welds & bends. Even where mill scale is initially uniform its brittleness upon cooling may produce flaking. The resulting non-uniform surface is undesirable from the standpoint of corrosion susceptibility. During operation mill scale is rapidly eroded from the steam generating surfaces & may subsequently be redeposited in critical areas. Preoperational acid cleaning removes mill scale & serves to remove atmospheric rust which inevitably accumulates to some degree during erection.

After a boiler / heat exchanger placed into service, numerous solid constituents may enter the units with the feed water & some portion of the insolubles can be expected to deposit on surfaces. If not removed these deposits accumulated over a period of time can minimize the quantity of these materials; however, complete freedom from deposition is not possible in a high pressure system. The need for occasional chemical cleaning during the life of the equipment has become a recognized fact & should be accepted as a routine maintenance practice. A frequency of service cleaning of every 3 to 4 months is recommended. This frequency should be increased if individual unit operating history dictates.

Salient Features

  • High purity product - synthetic grade
  • Fast acting - effective in removing a wide range of scales and deposits
  • Concentrated solution

Safety & Handling

AST - 1121 is generally safe but avoid contact with eyes and skin. Do not take internally. Gloves and goggles should be used while handling the product.

Packing

AST - 1121 available in 50 kg and 30 kg containers.

close

Send Your Message

Email Id
Error message
Subject
Message
Enter between 5 to 3,000 characters, English only.

Enter Image Text *
Your message has been sent successfully.
Your message has been sent successfully. Thanks for register as non member.
Contact Person
( Proprietor )
Location : Pune
Call : +91 8830971802